Original: $45.39
-70%$45.39
$13.62The Story
Information
Prepare chalky surfaces with Sandtex Retail Quick Drying Stabilising Solution, ideal for application on most exterior surfaces. This highly penetrative primer and stabilising solution is specifically designed to thoroughly prepare masonry surfaces for painting, ensuring that the paint adheres effectively. It's easy-to-apply, water-based formulation dries in just 4 hours. We recommend using this product on render, roughcast, pebbledash, and brickwork.
- Prepares challenging and chalky surfaces
- Simple to apply
- Ready to paint in 4 hours
- Suitable for most exterior surfaces
- Clear solution
Specifications
| Area | Exterior |
| Recommended Use | Ideal to prepare pebbledash, Seal render, porous surfaces, crumbling bricks, seal concrete block, porous brick, weathered bricks. |
| Base | Water-Based |
| Coverage | Up to 10m² per litre |
| Drying Time | 4 hours |
| Re-Coat Time | 4 hours |
| Recommended Coats | As required |
| Application Method | Brush |
| Clean Up | Wash equipment with clean, cold water |
Preparation
- Ensure all surfaces are thoroughly cleaned, completely dry, and devoid of any substances that could affect adhesion prior to applying Sandtex Quick Drying Stabilising Solution.
- Repair any surface imperfections to prevent moisture penetration.
- Remove loose or flaking material by scraping or brushing with a stiff brush.
- Eliminate any organic growth by vigorously brushing with a stiff bristled brush. Use a fungicidal wash to eradicate spores.
Application
- We recommend testing the product on a small area to confirm compatibility with the surface.
- Sandtex Stabilising Solution is ready to use and should not be diluted or mixed with other decorative materials.
- Apply a single coat using a brush; one coat is typically adequate.
- Allow sufficient drying time before applying top coats.
FAQ's
Q. Why use a Stabilising Solution?
A. If you have porous surfaces like bare or weathered masonry, cement render, or pebbledash, the Stabilising Solution stabilises and consolidates the surface. It deeply penetrates the substrate, binding loose or powdery materials together to prevent flaking or peeling. This ensures a stable foundation for subsequent paint or coatings. By reducing surface absorbency, it enhances adhesion of subsequent layers, promoting lasting paint adherence.
Q. How quickly does Sandtex Quick Dry Stabilising Solution dry?
A. Sandtex Quick Dry Stabilising Solution dries in just 1 hour, with the surface ready for topcoat application in 4 hours. This rapid drying time enables efficient completion of exterior projects. By sealing and providing a uniform texture, it facilitates even application of paint or coatings for a smooth and consistent finish.
Description
Information
Prepare chalky surfaces with Sandtex Retail Quick Drying Stabilising Solution, ideal for application on most exterior surfaces. This highly penetrative primer and stabilising solution is specifically designed to thoroughly prepare masonry surfaces for painting, ensuring that the paint adheres effectively. It's easy-to-apply, water-based formulation dries in just 4 hours. We recommend using this product on render, roughcast, pebbledash, and brickwork.
- Prepares challenging and chalky surfaces
- Simple to apply
- Ready to paint in 4 hours
- Suitable for most exterior surfaces
- Clear solution
Specifications
| Area | Exterior |
| Recommended Use | Ideal to prepare pebbledash, Seal render, porous surfaces, crumbling bricks, seal concrete block, porous brick, weathered bricks. |
| Base | Water-Based |
| Coverage | Up to 10m² per litre |
| Drying Time | 4 hours |
| Re-Coat Time | 4 hours |
| Recommended Coats | As required |
| Application Method | Brush |
| Clean Up | Wash equipment with clean, cold water |
Preparation
- Ensure all surfaces are thoroughly cleaned, completely dry, and devoid of any substances that could affect adhesion prior to applying Sandtex Quick Drying Stabilising Solution.
- Repair any surface imperfections to prevent moisture penetration.
- Remove loose or flaking material by scraping or brushing with a stiff brush.
- Eliminate any organic growth by vigorously brushing with a stiff bristled brush. Use a fungicidal wash to eradicate spores.
Application
- We recommend testing the product on a small area to confirm compatibility with the surface.
- Sandtex Stabilising Solution is ready to use and should not be diluted or mixed with other decorative materials.
- Apply a single coat using a brush; one coat is typically adequate.
- Allow sufficient drying time before applying top coats.
FAQ's
Q. Why use a Stabilising Solution?
A. If you have porous surfaces like bare or weathered masonry, cement render, or pebbledash, the Stabilising Solution stabilises and consolidates the surface. It deeply penetrates the substrate, binding loose or powdery materials together to prevent flaking or peeling. This ensures a stable foundation for subsequent paint or coatings. By reducing surface absorbency, it enhances adhesion of subsequent layers, promoting lasting paint adherence.
Q. How quickly does Sandtex Quick Dry Stabilising Solution dry?
A. Sandtex Quick Dry Stabilising Solution dries in just 1 hour, with the surface ready for topcoat application in 4 hours. This rapid drying time enables efficient completion of exterior projects. By sealing and providing a uniform texture, it facilitates even application of paint or coatings for a smooth and consistent finish.
