MDPE Tee 25mm - 1/2" BSPM - 25mm

MDPE Tee Compression Fitting 25mm to 1/2" BSPM provides a reliable branch connection for MDPE piping in water supply and irrigation setups. It takes a 25mm main line and yields a 1/2" BSP male outlet with a 90-degree branch, enabling tidy, no-wuss connections on-site. Constructed from MDPE, the fitting offers chemical and corrosion resistance suitable for domestic and light industrial environments. The compression joint seals with a nut and olive, delivering leak-free performance when installed in accordance with the manufacturer’s instructions. Rated PN10, it is designed for up to 10 bar (approximately 145 psi) at 20°C, appropriate for typical potable water and irrigation applications. Key specifications

• Material: MDPE (Medium-Density Polyethylene)
• Connection: 25mm pipe to 1/2" BSP Male outlet
• Branch angle: 90°
• Pressure rating: PN10 (10 bar) at 20°C
• Usage: Water supply, garden irrigation, and light industrial piping

Why this matters for tradespeople - Quick, tool-friendly installation without welding or solvent bonding; compatible with standard MDPE compression olives and nuts. - A dedicated branch point from a 25mm main line to feed fixtures, taps or small irrigation lines, with a robust, long-service MDPE joint. - Versatile for outdoor and indoor installations, with good resistance to routine chemical exposure found in residential and commercial settings. Practical notes - Ensure pipe ends are cut square and de-burred before fitting. Use the correct olive size and tighten the compression nut to the manufacturer’s torque guidance to achieve a leak-free joint. - Inspect joints after pressurising; reseat if any slow leaks appear. - Suitable for systems operating within the PN10 rating; avoid exceeding temperature and pressure conditions beyond spec.