IBC 2” S60X6 Cap with Lever Valve and 32mm MDPE Tee

For tradespeople working with Intermediate Bulk Containers (IBC), this kit brings together a S60X6 end cap with a built‑in BSPF thread, a brass nickel‑plated lever valve and a 32mm MDPE tee to deliver a secure, easy‑to‑operate liquid connection for IBC systems.

• IBC S60X6 End Cap with BSPF thread — made from durable plastic, designed to seal IBC outlets and prevent leaks. The built‑in BSPF (female) thread provides a straightforward connection point for BSP fittings.
• Brass Nickel Plated Lever Valve — 1" BSP, M‑F configuration with a lever handle for smooth on/off control. Brass offers strength and corrosion resistance; nickel plating adds durability against wear and environmental factors.
• MDPE Tee 32mm – 1" BSPM — MDPE fitting with 32mm pipe connections and a 1" BSP male thread on the main run. MDPE fittings are known for durability, flexibility and chemical resistance, with threaded compression connections that help create a tight, leak‑free seal without specialist tools. The PN10 rating confirms suitability up to 10 bar (approximately 145 psi) for typical water and light chemical applications.

Why it matters on site

• Designed for IBC liquid handling, enabling secure sealing at the container and straightforward flow control downstream.
• Combines a robust end cap, reliable valve and a reliable tee to enable safe branch connections and controlled transfer of liquids.
• Threaded connections (BSP) allow interchange with common fittings, reducing the need for additional adapters.

Practical installation tips

• Clean all BSP threads before assembly and use PTFE thread tape to help seal BSP connections where appropriate.
• Hand‑tighten the end cap and valve, then give a small additional turn to seat the seal firmly without over‑tightening.
• Verify the MDPE run for free movement after fitting the 32mm tee, checking for any kinks or stress on the pipework.