šŸŽ‰ Up to 70% Off Selected ItemsShop Sale
2400 x 600 P5 Chipboard Flooring Grade T&G 4 edges (Moisture Resistant)
HomeStore

2400 x 600 P5 Chipboard Flooring Grade T&G 4 edges (Moisture Resistant)

2400 x 600 P5 Chipboard Flooring Grade T&G 4 edges (Moisture Resistant)

Select Size
From $10.41

Original: $34.71

-70%
2400 x 600 P5 Chipboard Flooring Grade T&G 4 edges (Moisture Resistant)—

$34.71

$10.41

The Story

Sustainable flooring solution for easy use.
  • High density, high performance flooring panel - easy to lay
  • Choice of thicknesses
  • Tongue and grooved all four edges
  • Quieter flooring

Ā 

  • The long sides should be laid at 90 degrees to the joists & the ends should always meet on a joist. Floor board joints should be staggered for greater strength.
  • Fix panels in place with screws. Each screw should be countersunk & a pilot hole drilled as this makes fixing the boards easier & takes the heads of the screws below the level of the floor.
  • Do not be tempted to join boards between joists as they will soon sag & cause a weak spot in the floor. We recommend using screws rather than nails as excessive hammering could disrupt plasterboard below.
  • 22mm Egger Protect Peelable protective cover version also available when waterproof boards are needed during site construction.Ā 

Ā 

2400 x 600 P5 Chipboard Flooring Grade T&G 4 edges (Moisture Resistant) - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

2400 x 600 P5 Chipboard Flooring Grade T&G 4 edges (Moisture Resistant) - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

2400 x 600 P5 Chipboard Flooring Grade T&G 4 edges (Moisture Resistant) - Image 4

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

Sustainable flooring solution for easy use.
  • High density, high performance flooring panel - easy to lay
  • Choice of thicknesses
  • Tongue and grooved all four edges
  • Quieter flooring

Ā 

  • The long sides should be laid at 90 degrees to the joists & the ends should always meet on a joist. Floor board joints should be staggered for greater strength.
  • Fix panels in place with screws. Each screw should be countersunk & a pilot hole drilled as this makes fixing the boards easier & takes the heads of the screws below the level of the floor.
  • Do not be tempted to join boards between joists as they will soon sag & cause a weak spot in the floor. We recommend using screws rather than nails as excessive hammering could disrupt plasterboard below.
  • 22mm Egger Protect Peelable protective cover version also available when waterproof boards are needed during site construction.Ā 

Ā